DIMENSIONS
|
d |
31.75 mm | Bore diameter |
|
d1 |
≈46.1 mm | Outer diameter inner ring |
|
A |
34.5 mm | Overall width |
|
A1 |
13 mm | Flange width |
|
A3 |
3.2 mm | Depth of centring recess |
|
A5 |
24.5 mm | Standout of end cover |
|
B |
42.9 mm | Width of inner ring |
|
B4 |
6 mm | Distance from locking device side face to thread centre |
|
Db1 |
87 mm | Top external diameter |
|
Db2 |
95 mm | Base external diameter |
|
Dc |
106.4 mm | Diameter of housing centering recess |
|
J |
92 mm | Distance between attachment bolts |
|
L |
118 mm | Overall length |
|
N |
14 mm | Diameter of attachment bolt hole |
|
s1 |
25.4 mm | Distance from locking device side face to raceway centre |
|
T |
46.4 mm | Overall unit width |
| DOWEL PINS | ||
|
J6 |
106 mm | Distance of dowel pins |
|
J7 |
29 mm | Axial offset of dowel pins |
|
N4 |
4 mm | Recommended diameter for dowel pins |
CALCULATION DATA
| Basic dynamic load rating |
C |
25.5 kN |
| Basic static load rating |
C0 |
15.3 kN |
| Fatigue load limit |
Pu |
0.655 kN |
| Limiting speed |
|
5 300 r/min |
| with shaft tolerance h6 | ||
MASS
| Mass bearing unit | 1.35 kg |
MOUNTING INFORMATION
| Set screw |
G2 |
5/16-24 UNF |
| Hexagonal key size for set screw |
|
3.969 mm |
| Recommended tightening torque for set screw |
|
6.5 Nm |
| Recommended diameter for attachment bolts, mm |
G |
12 mm |
| Recommended diameter for attachment bolts, inch |
G |
0.5 in |
INCLUDED PRODUCTS
| Housing | FY 507 M |
| Bearing | YAR 207-104-2F |
ASSOCIATED PRODUCTS
| End cover | ECY 207 |
